Skoda SUPERB - 05-2009 Manual page 111

110 Air conditioning system
A
Setting of the temperature for the left side.
7
A
Automatic mode AUTO
8
A
Switching off Climatronic
OFF
9
A
Setting the blower speed
10 
A
Depending on the vehicle equipment: Button for direct switching on/off of
11
⇒ page 112, or switching on/off of windscreen heater*
auxiliary heating*


A
Switching on/off of the temperature setting in dual mode
12
A
Switching cooling on and off
13
A
Setting of the temperature for the right side.
14
Note
Below the top row of buttons is located the interior temperature sensor. Do not
glue or cover over the sensor, otherwise it could have an unfavourable effect on the
Climatronic.
Automatic mode
The automatic mode is used in order to maintain a constant temper-
ature and to demist the windows in the interior of the car.
Switching automatic mode on
– Set a temperature between +18 °C and +26 °C.
– Move the air outlet vents 1 and 2
flow is directed slightly upwards.
– Press the button . In the right or left top corner a warning light
AUTO
lights up, depending on which unit was last selected.
If the warning light in the top right corner of the button
Climatronic operates in "HIGH" mode. The "HIGH" mode is the standard setting of
the Climatronic.
When pressing again the button
mode and the warning light in the top left corner lights up. The Climatronic uses
DUAL
AC
⇒ page 105, fig. 125
so that the air
lights up, the
AUTO
, the Climatronic changes into the "LOW"
AUTO
only in this mode the lower blower speed. However taking into account the noise
level, this is more comfortable, yet be aware that the effectiveness of the air condi-
tioning system is reduced particularly if the vehicle is fully occupied.
By pressing again the button , you change into the "HIGH" mode.
AUTO
The automatic mode is switched off by pressing the button for the air distribution
or increasing or decreasing the blower speed. The temperature is nevertheless
regulated.
switching cooling on and off
switching cooling on and off
– Press the button . The warning light lights up in the button.
AC
– When you again press the switch
off. The warning light in the button goes out. Only the function of the
ventilation remains active when no lower temperature than the
outside temperature can be reached.
Setting temperature
You can separate the interior temperature for the left and right side sepa-
rately.
– You can set the temperature for both sides after switching on the igni-
A
tion with the control dial .
7
– If you wish to set the temperature for the right side, turn the control
A
dial . The warning light in the button
14
that differing temperatures for the left and right side can be set.
If the warning light in the button
DUAL
A
cannot be set with the control dial
7
the button . The warning light in the button which indicates the possibility to
DUAL
set differing temperatures for the left and right side, goes out.
AC , the cooling system is switched
lights up, this indicates
DUAL
lights up, the temperature for both sides
. You can reinitiate this function by pressing