Fax Redial; How To Fax; Automatic Transmission; Faxing From The Adf - Ricoh FAX 1190L User Manual

User's guide
Hide thumbs Also See for FAX 1190L:
Table of Contents

Advertisement

Fax Redial

If you are sending a fax manually and the line
is busy, press
Redial/Pause, and then
press
Start to try again. If you want to
make a second call to the last number dialled,
you can save time by pressing
Redial/Pause and
Redial/Pause only works if you dialled
from the control panel.
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
Start.

How to Fax

Automatic transmission

This is the easiest way to send a fax.
Press
Start immediately after dialling. (For
an example of automatic faxing, follow the
steps in Faxing from the ADF on this page.)

Faxing from the ADF

1
If it is not illuminated in green, press
(Fax).
2
Put the document face down in the ADF.
3
Dial the fax number.
Press
Start. The machine starts
scanning the document.

Manual transmission

Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
(For EU and Asia/Oceania model, use the
handset and dial of the external phone)
1
If it is not illuminated in green, press
(Fax).
2
Load your document.
3
Pick up the handset and listen for a dial
tone.
4
On the external phone, dial the fax
number you want to call.
5
When you hear the fax tone, press
Start.
6
Replace the handset.
Setup Send
3
3 - 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents