Making Copies; Using The Machine As A Copier; Enter Copy Mode - Ricoh FAX 1190L User Manual

'
8

Making copies

Using the machine as a
copier
You can use your machine as a copier,
making up to 99 copies at a time.

Enter Copy mode

Before making copies, make sure that
(Copy) is illuminated in green. If it is
not, press (Copy) to enter Copy mode.
The default setting is Fax mode. You can
change the number of seconds or minutes
that the machine stays in Copy mode.
(See Setting the Mode Timer on page 2-4.)
The LCD shows the default copy setting
Copy Ratio
Quality
8 - 1
No of Copies
(for EU and Asia/Oceania)
The printable area of your machine begins at
approximately 2 mm from both sides and
3 mm from the top or bottom of the paper.
2 mm
3 mm
(for USA and Canada)
The printable area of your machine begins at
approximately 0.16 in. (4 mm) from both
sides and 0.12 in. (3 mm) from the top or
bottom of the paper.
0.16" (4 mm)
0.12" (3 mm)
Note
This printable area shown above is for a
single copy or a 1 in 1 copy using A4 size
paper. The printable area changes with the
paper size.
Unprintable
area
Unprintable
area