Choosing The Handset Volume (For Volume Amplify) (For Usa And Canada Only); Setting Volume Amplify (For Usa And Canada Only) - Ricoh FAX 1190L User Manual

Choosing the Handset
Volume (For Volume Amplify)
(For USA and Canada only)
Before you begin to use the machine, you
must decide if you need to set the handset
volume to Vol Amplify:On for a user who
is hearing-impaired. The AMPLIFY volume
level complies with FCC standard.
Vol Amplify:Off
This default setting is appropriate if none of
the users are hearing-impaired. During a
conversation, users can press
on the control panel to adjust the
volume the two volume levels. When the
handset is replaced, the handset volume will
remain until you change it again.
Vol Amplify:On—Temporary
This setting is appropriate if some of the
users are hearing-impaired. During a
conversation, users can press
on the control panel to adjust the three
volume levels.
Vol Amplify:On—Permanent
Choose Vol Amplify:On—Permanent if
all of the users are hearing-impaired. During
conversation, users can press
on the control panel to adjust the three
volume levels. When the handset is replaced,
the handset volume returns to the default
setting of Volume Amplify.
Note
When you press
control panel to adjust the volume, the LCD
shows the setting you are choosing. Each key
press changes the volume to the next level.
CAUTION
It is important that you do NOT choose
Permanent unless ALL the users are
hearing-impaired. Otherwise, the default
setting of Volume Amplify may damage
the hearing of some users.
or
or
or
or on the
Setting Volume Amplify
(For USA and Canada only)
Please carefully read Choosing the Handset
Volume (For Volume Amplify) (For USA and
Canada only) on page 2-7 before you do the
following steps;
1
Press Menu/Set, 1, 4, 5.
5.Volume Amplify
2
If none of the users are
hearing-impaired, press ▲ or ▼ to
select Vol Amplify:Off, and then
press Menu/Set and go to Step 4.
—OR—
If some or all of the users are
hearing-impaired, select
Vol Amplify:On, and then press
Menu/Set.
3
If all the users are hearing-impaired,
press to select Permanent, and then
press Menu/Set.
—OR—
If only some or all of the users are
hearing-impaired, select Temporary,
and then press Menu/Set.
4
Press Stop/Exit.
Getting started
2 - 7
2