Dialling Options; Access Codes And Credit Card Numbers; Pause; Tone Or Pulse - Ricoh FAX 1190L User Manual

Dialling options

Access codes and credit card
numbers
Sometimes you may want to choose from
several long distance carriers when you
make a call. Rates may vary depending on
the time and destination. To take advantage
of low rates, you can store the access codes
or long-distance carriers and credit card
numbers as One-Touch and Speed-Dial
numbers. You can store these long dialling
sequences by dividing them and setting them
up on separate One-Touch and Speed Dial
numbers in any combination. You can even
include manual dialling using the dial pad.
(See Storing One-Touch numbers on page
5-1 and Storing Speed-Dial numbers on page
5-2.)
For example, perhaps you have stored '555'
on One-Touch key 1 and '7000' on
One-Touch key 2. If you press One-Touch
key 1, One-Touch key 2, and
will dial '555-7000'.
To temporarily change a number, you can
substitute part of the number with manual
dialling using the dial pad.
For example, to change the number to
555-7001 you could press One-Touch key 1
and then press 7001 using the dial pad.

Pause

Press
3.5-second pause between numbers. If you
are dialling overseas, you can press
needed to increase the length of the pause.

Tone or Pulse

If you have a Pulse dialling service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have Touch Tone service, you
will not need this feature to send tone signals.
1
2
Start, you
Quick-Dial numbers and dialling options
Redial/Pause to insert a
Redial/Pause as many times as
Lift the handset of the external phone.
Press # on the control panel of your
machine. Any digits dialled after this will
send tone signals.
When you hang up, the machine will
return to the Pulse dialling service.
5
5 - 4