Dell PowerEdge E05S Owner's Manual page 47

Message
TPM or TCM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security.
TPM or TCM
failure.
Unable to launch
System Services
image. System
halted!
Unexpected
interrupt in
protected mode.
Causes
This message displays during
system restart after a TPM or
TCM configuration
command has been entered.
User interaction is required
to proceed.
A TPM or TCM function has
failed.
System halted after <F10>
keystroke because System
Services image is either
corrupted in the system
firmware or has been lost due
to system board replacement.
The iDRAC6 Enterprise card
flash memory may be
corrupted.
Improperly seated memory
modules or faulty
keyboard/mouse controller
chip.
Corrective Actions
Enter I or M to proceed.
See "Getting Help" on
page 185.
Restart the system and
update the Lifecycle
Controller repository to the
latest software to restore full
functionality. See the
Lifecycle Controller user
documentation for more
information.
Restore the flash memory
using the latest version on
support.dell.com. See the
iDRAC6 user's guide for
instructions on performing a
field replacement of the flash
memory.
Reseat the memory modules.
See "Troubleshooting System
Memory" on page 159. If the
problem persists, see
"Getting Help" on page 185.
About Your System
47