Removing And Installing Integral Abs Pressure Modulator; Removing Integral Abs Pressure Modulator - BMW R1150RT - MAINTENANCE INTEGRAL ABS Maintenance Manual

2
1
Removing and installing Inte-
34 00
gral ABS pressure modulator
d
Warning:
All repair and maintenance work on the
BMW Integral ABS must be performed by trained,
qualified specialists.
Comply with all maintenance and repair instructions
and always work through the various steps in the
correct order.
Use only new brake fluid from freshly opened con-
tainers.
34.14
3
Removing Integral ABS pressure mod-
ulator
e
Attention:
Do not allow brake fluid to come into contact with
painted parts of the motorcycle as brake fluid de-
stroys paint.
•
Drain the brake system (
•
Disconnect ground lead from battery and insu-
late.
•
Push protective caps (1) up.
•
Remove spring clips (2).
4
R28340060
34.16).
a