Integral Abs; Removing And Installing Bleed Lines, Wheel Circuit Reservoirs - BMW R1150RT - MAINTENANCE INTEGRAL ABS Maintenance Manual

Integral ABS

34 51
Removing and installing bleed lines,
wheel circuit reservoirs
•
Remove caps of wheel circuit reservoirs com-
plete with bleed lines.
•
Installation is the reverse of the removal proce-
dure. Pay particular attention to the following:
•
Make sure the bleed lines are free of kinks.
•
Cut the bleed lines to length if necessary, and cut
the ends at an angle.
34.30
R22340080