•
Fit the protective caps on the bleed screws.
•
Top up the brake fluid at least until the level
reaches the "MIN" mark.
•
Wipe the rim of the reservoir, the rubber dia-
phragm and the cover to remove brake fluid, and
carefully re-assemble the components.
•
Recheck the brake-fluid level.
–
Place the motorcycle on its centre stand.
Specified level
not below ......................................................... MIN
e
Attention:
After all the work on the brake system has been
completed, run a bleed test using the
BMW MoDiTeC.
Brake fluid....................................................DOT 4
34.22
R22000150