Dell PowerEdge R710 Series Hardware Owner's Manual page 33

Table 1-1. LCD Status Messages (continued)
Code Text
E2014 CMOS RAM
failure.
Power cycle
AC.
E2015 DMA
Controller
failure.
Power cycle
AC.
E2016 Interrupt
Controller
failure.
Power cycle
AC.
E2017 Timer refresh
failure.
Power cycle
AC.
E2018 Programmable
Timer error.
Power cycle
AC.
E2019 Parity error.
Power cycle
AC.
Cause
CMOS failure. CMOS
RAM not functioning
properly.
DMA controller failure.
Interrupt controller failure. Remove AC power to the
Timer refresh failure.
Programmable interval
timer error.
Parity error.
Corrective Actions
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help."
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help."
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help."
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help."
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help."
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help."
About Your System
33