Dell PowerEdge R710 Series Hardware Owner's Manual page 13

Item Indicator, Button, or
Connector
1 Information tag
2 Power-on indicator,
power button
3 NMI button
4 USB connectors (2)
5 Video connector
Icon Description
A slide-out label panel for system
information including the Express
Service tag, Embedded NIC1 MAC
address, and iDRAC6 Enterprise card
MAC address.
The power-on indicator lights when the
system power is on.
The power button controls the DC
power supply output to the system.
When the system bezel is installed, the
power button is not accessible.
NOTE:
video monitor can take up to 25 seconds
to display an image, depending on the
amount of memory installed in the system.
NOTE:
systems, turning off the system using the
power button causes the system to
perform a graceful shutdown before
power to the system is turned off.
NOTE:
press and hold the power button for five
seconds.
Used to troubleshoot software and
device driver errors when using certain
operating systems. This button can be
pressed using the end of a paper clip.
Use this button only if directed to do so
by qualified support personnel or by the
operating system's documentation.
Connects USB devices to the system.
The ports are USB 2.0-complaint.
Connects a monitor to the system.
When powering on the system, the
On ACPI-compliant operating
To force an ungraceful shutdown,
About Your System
13