Dell PowerEdge R710 Series Hardware Owner's Manual page 31

Dell server hardware owner's manual
Hide thumbs Also See for PowerEdge R710 Series:
Table of Contents

Advertisement

Table 1-1. LCD Status Messages (continued)
Code
Text
E171F PCIe fatal
error on Bus
## Device ##
Function ##
PCIe fatal
error on Slot
#. Review &
clear SEL.
E1810 Hard drive ##
fault. Review
& clear SEL.
E1812 Hard drive ##
removed.
Check drive.
E1A11 PCI Riser
hardware &
configuration
mismatch.
Reconfigure.
E1A12 PCI Riser not
detected.
Check Riser.
Cause
The system BIOS has
reported a PCIe fatal error
on a component that
resides in PCI
configuration space at bus
##, device ##, function
##.
The system BIOS has
reported a PCIe fatal error
on a component that
resides in the specified slot.
The specified hard drive
has experienced a fault.
The specified hard drive
has been removed from the
system.
PCIe risers are not
configured correctly. Some
invalid configurations
prevent the system from
powering on.
One or both of the PCIe
risers are missing. This
prevents the system from
powering on.
Corrective Actions
Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards."
Reinstall the expansion-
card riser. See "Expansion
Cards and Expansion-
Card Risers." If the
problem persists, the riser
card or system board is
faulty. See "Getting Help."
See "Troubleshooting a
Hard Drive."
Information only.
Reinstall the expansion-
card riser. See "Expansion
Cards and Expansion-
Card Risers."
If the problem persists,
the riser card or system
board is faulty. See
"Getting Help."
Reinstall the missing riser
card(s). See "Replacing
Expansion-Card Riser 1"
and "Replacing
Expansion-Card Riser 2."
About Your System
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

R710 - poweredge - 4 gb ramExternal oemr xl v2 r710

Table of Contents