Table 4-34 Ip Acl Commands - SMC Networks 8708L2 - annexe 1 Management Manual

Tigerswitch 10g gigabit ethernet switch
Hide thumbs Also See for 8708L2 - annexe 1:
Table of Contents

Advertisement

IP ACL, Egress IP ACL, Ingress MAC ACL or Egress MAC ACL), but a
mask can be bound to up to four ACLs of the same type.
Command Groups Function
IP ACLs
MAC ACLs
ACL Information
IP ACLs
Command
access-list ip
access-list ip
extended
fragment-auto-m
ask
permit, deny
permit, deny
show ip
access-list
access-list ip
mask-precedence
mask
Table 4-33 Access Control List Commands
Configures ACLs based on IP addresses, TCP/
UDP port number, protocol type, and TCP control
code
Configures ACLs based on hardware addresses,
packet format, and Ethernet type
Displays ACLs and associated rules; shows ACLs
assigned to each port

Table 4-34 IP ACL Commands

Function
Creates an IP ACL and enters
configuration mode for standard or
extended IP ACLs
Automatically creates extra masks to
support fragmented ACL entries
Filters packets matching a specified source
IP address
Filters packets meeting the specified
criteria, including source and destination
IP address, TCP/UDP port number,
protocol type, and TCP control code
Displays the rules for configured IP ACLs PE
Changes to the IP Mask mode used to
configure access control masks
Sets a precedence mask for the ACL rules IP-Mask
A
C
CCESS
ONTROL
L
C
IST
OMMANDS
Page
4-119
4-137
4-149
Mode
Page
GC
4-120
GC
4-120
STD-ACL 4-122
EXT-ACL 4-123
4-126
GC
4-126
4-128
4-119

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tigerswitch smc8708l2

Table of Contents