Table of Contents
Advertisement
Table 4-4 Command Group Index (Continued)
Command Group Description
Mirror Port
Rate Limiting
Link Aggregation
Address Table
Spanning Tree
VLANs
GVRP and
Bridge Extension
Priority
Multicast Filtering Configures IGMP multicast filtering, query
IP Interface
DNS
Mirrors data to another port for analysis without
affecting the data passing through or the performance
of the monitored port
Controls the maximum rate for traffic transmitted or
received on a port
Statically groups multiple ports into a single logical
trunk; configures Link Aggregation Control Protocol
for port trunks
Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
Configures Spanning Tree settings for the switch
Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs and protocol VLANs
Configures GVRP settings that permit automatic
VLAN learning; shows the configuration for the
bridge extension MIB
Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for
each priority queue, also sets priority for TCP/UDP
traffic types, IP precedence, and DSCP
parameters, and specifies ports attached to a multicast
router
Configures the IP address and gateway for
management access
Configures DNS services.
C
G
OMMAND
ROUPS
Page
4-182
4-184
4-185
4-198
4-204
4-229
4-247
4-252
4-267
4-278
4-284
4-13
Advertisement
Table of Contents
