Displaying Log Messages; Figure 3-18 Displaying Logs - SMC Networks 8708L2 - annexe 1 Management Manual

CLI – Enter the syslog server host IP address, choose the facility type and
set the logging trap.
Console(config)#logging host 10.1.0.9
Console(config)#logging facility 23
Console(config)#logging trap 4
Console(config)#logging trap
Console(config)#exit
Console#show logging trap
Syslog logging:
REMOTELOG status:
REMOTELOG facility type:
REMOTELOG level type:
REMOTELOG server ip address: 10.1.0.9
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
Console#

Displaying Log Messages

Use the Logs page to scroll through the logged system and event messages.
The switch can store up to 2048 log entries in temporary random access
memory (RAM; i.e., memory flushed on power reset) and up to 4096
entries in permanent flash memory.
Web – Click System, Log, Logs.
Enabled
Disabled
local use 7
Warning conditions

Figure 3-18 Displaying Logs

B C
ASIC ONFIGURATION
4-61
4-62
4-63
4-64
3-43