Table 19-11 Show Logging Flash/Ram - Display Description; Table 19-12 Show Logging Trap - Display Description - SMC Networks 7824M/FSW - annexe 1 Management Manual

Example
The following example shows that system logging is enabled, the message
level for flash memory is "errors" (i.e., default level 3 - 0), and the message
level for RAM is "debugging" (i.e., default level 7 - 0).
Console#show logging flash
Syslog logging:
History logging in FLASH: level errors
Console#show logging ram
Syslog logging:
History logging in RAM: level debugging
Console#

Table 19-11 show logging flash/ram - display description

Field
Syslog logging
History logging in
FLASH
History logging in
RAM
The following example displays settings for the trap function.
Console#show logging trap
Syslog logging: Enable
REMOTELOG status: disable
REMOTELOG facility type: local use 7
REMOTELOG level type:
REMOTELOG server IP address: 1.2.3.4
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#

Table 19-12 show logging trap - display description

Field
Syslog logging
REMOTELOG
status
REMOTELOG
facility type
Enabled
Enabled
Description
Shows if system logging has been enabled via the logging
on command.
The message level(s) reported based on the logging history
command.
The message level(s) reported based on the logging history
command.
Debugging messages
Description
Shows if system logging has been enabled via the logging
on command.
Shows if remote logging has been enabled via the logging
trap command.
The facility type for remote logging of syslog messages as
specified in the logging facility command.
E L
VENT OGGING
C
OMMANDS
19-43