Viewing The Current Port Configuration - SMC Networks 6900FSC - annexe 5 Management Manual

Parameter
Flow Control Disabled
Speed and
Duplex

Viewing the Current Port Configuration

The Port Information screen displays the port type, status, link
state, and flow control in use, as well as the communication speed
and duplex mode. To change any of the port settings, use the Port
Configuration menu.
Port
-------------------------------------------------------------
1. 10/100TX
2. 10/100TX
3. 10/100TX
4. 10/100TX
5. 10/100TX
6. 10/100TX
7. 10/100TX
8. 10/100TX
9. 10/100TX
10. 10/100TX
11. 10/100TX
12. 10/100TX
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move. <Enter> to select.
Default
Auto
Port Information :
================
Type Operational Link
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
<PREV PAGE> <NEXT PAGE>
U S
SING THE YSTEM
Description
Used to enable or disable flow control. Flow
control can eliminate frame loss by "blocking"
traffic from end stations or segments connected
directly to the switch when its buffers fill. IEEE
802.3x flow control is used for full duplex. Note
that flow control should not be used if a port is
connected to a hub.
Indicates current port speed and duplex mode.
Note that Auto-negotiation is not available for
the 100BASE-FX ports. 100BASE-FX is fixed at
100 Mbps, full-duplex. And while 1000BASE-SX
does auto-negotiate duplex mode and flow
control, its speed is fixed at 1000 Mbps.
Port
FlowControl
InUse
UP NONE
UP NONE
UP NONE
UP NONE
UP NONE
UP NONE
UP NONE
UP NONE
UP NONE
UP NONE
UP NONE
UP NONE
C
ONFIGURATION
1 - 12
Speed and
Duplex InUse
100-FULL
100-FULL
100-FULL
100-FULL
100-FULL
100-FULL
100-FULL
100-FULL
100-FULL
100-FULL
100-FULL
100-FULL
P
ROGRAM
2-27