System Management Commands; Device Designation Commands; Hostname; Table 19-2 Device Designation Commands - SMC Networks 7824M/FSW - annexe 1 Management Manual

S M
YSTEM ANAGEMENT

Device Designation Commands

This section describes commands used to configure information that
uniquely identifies the switch.
Command

hostname

snmp-server
contact
snmp-server
location
hostname
This command specifies or modifies the host name for this device. Use the
no form to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#hostname RD#1
Console(config)#
19-2
C
OMMANDS

Table 19-2 Device Designation Commands

Function
Specifies the host name for the switch
Sets the system contact string
Sets the system location string
Mode Page
GC 19-2
GC 20-5
GC 20-5