Table of Contents
Advertisement
Web – Click Priority, IP Precedence Priority. Select an entry from the IP
Precedence Priority Table, enter a value in the Class of Service Value field,
and then click Apply.
CLI – The following example globally enables IP Precedence service on
the switch, maps IP Precedence value 1 to CoS value 0 (on port 1), and
then displays the IP Precedence settings.
Console(config)#map ip precedence
Console(config)#interface ethernet 1/1
Console(config-if)#map ip precedence 1 cos 0
Console(config-if)#end
Console#show map ip precedence ethernet 1/1
Precedence mapping status: disabled
Port
Precedence COS
--------- ---------- ---
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Console#
* Mapping specific values for IP Precedence is implemented as an interface configu-
ration command, but any changes will apply to the all interfaces on the switch.
Figure 13-6 IP Precedence Priority
0
0
1
0
2
2
3
3
4
4
5
5
6
6
7
7
L
3/4 P
AYER
RIORITY
S
ETTINGS
31-13
24-2
31-13
31-17
13-11
Advertisement
Table of Contents
