Configuring Receiver; Receiver Id Mode; Collect Ip Address And Port; Maximum Datagram Size - SMC Networks 7824M/VSW - annexe 1 Manual

CLI
7.16.7
7.16.7.1
7.16.7.2
7.16.7.3
7.16.7.4
232

Configuring Receiver

Receiver ID mode

To open sFlow receiver mode and configure this receiver in detail, use the following
command.
Command
sflow-receiver <1-65535>
no sflow-receiver <1-65535>

Collect IP address and port

To specify IP address of sFlow collector, use the following command.
Command
collect-ip A.B.C.D
no collect-ip
To specify UDP port of sFlow collector, use the following command.
Command
collect-port <1-65535>
no collect-port

Maximum Datagram Size

To set the maximum datagram size of sampling packets which are transmitted through re-
ceiver, use the following command.
Command
max-datagram-size <256-1400>
no max-datagram-size

Owner Name of sFlow Receiver

Owner name of specific receiver represents who is the user of this receiver. If you delete
existing owner name of receiver, all configurations including collect-IP, collect-port and
timeout of receiver would be also deleted.
Mode
Opens a specific sFlow receiver mode.
Global
Deletes specified sFlow receiver.
Mode
Specifies IP address of sFlow collector.
A.B.C.D: IP address of collector (default:0.0.0.0)
Receiver
Deletes specified IP address of sFlow collector.
Mode
Specifies UDP port of sFlow collector
1-65535: UDP port number (default:6343)
Receiver
Deletes specified UDP port of sFlow collector.
Mode
Sets the maximum datagram size of sampling packets
that are transmitted by this receiver.
Receiver
256-1400: maximum datagram size (default:1400)
Deletes the configured maximum datagram size.
Management Guide
TigerAccess™ EE
Description
Description
Description
Description
SMC7824M/VSW