Management Guide
TigerAccess™ EE
6.3.5
6.3.6
6.3.7
SMC7824M/VSW
MAC Table
To display MAC table recorded in specific port, use the following command.
Command
show mac BRIDGE [PORTS]
show mac count [PORTS]
The following is an example of displaying a current MAC table.
SWITCH(config)# show mac 1-3
==================================================================
port
mac addr
==================================================================
1
00:d0:cb:22:00:49
2
00:0b:5d:99:58:4c
3
00:0b:5d:51:3a:a8
SWITCH(config)#
Running Time of System
To display running time of the system, use the following command.
Command
show uptime
The following is an example of displaying running time of the system.
SWITCH# show uptime
10:41am up 15 days, 10:55, 0 users, load average: 0.05, 0.07, 0.01
SWITCH#
System Information
To display the system information, use the following command.
Command
show system
The following is an example of displaying the system information of the switch.
SWITCH# show system
Mode
Enable
Shows MAC table.
Global
BRIDGE: bridge name
Bridge
PORTS: port number
permission
status
OK
dynamic
OK
dynamic
OK
dynamic
Mode
Enable
Global
Shows running time of the system.
Bridge
Mode
Enable
Shows the system information.
Global
Bridge
Description
in use
0.02
4.95
6.05
Description
Description
CLI
131