Limiting Number Of Users - SMC Networks 7824M/VSW - annexe 1 Manual

Management Guide
TigerAccess™ EE
4.1.7
SMC7824M/VSW
Enter new password:(Enter)
Bad password: too short.
Warning: weak password (continuing).
Re-enter new password: (Enter)
Password changed.
SWITCH(config)# user add test1 level 1 level1user
Changing password for test1
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password: (Enter)
Bad password: too short.
Warning: weak password (continuing).
Re-enter new password: (Enter)
Password changed.
SWITCH(config)# show user
====================================================
User name
====================================================
test0
test1
SWITCH(config)#
The following is an example of configuring an authority of the security level 0 and 1.
SWITCH(config)# privilege view level 0 enable
SWITCH(config)# privilege enable level 0 show
SWITCH(config)# privilege enable level 1 configure terminal
SWITCH(config)# show privilege
Command Privilege Level Configuration
-----------------------------------------------
Node All
EXEC(ENABLE)
EXEC(VIEW)
EXEC(ENABLE)
3 entry(s) found.
SWITCH(config)#
In the above configuration, as level 0, it is possible to use only show command in Privi-
leged EXEC Enable mode; however as level 1, it is possible to use not only the com-
mands in level 1 but also time configuration commands in Privileged EXEC Enable mode
and accessing commands to Global Configuration mode.

Limiting Number of Users

For the switch, you can limit the number of users accessing the switch through both con-
sole interface and telnet. In case of using the system authentication with RADIUS or TA-
CACS+, a configured number includes the number of users accessing the switch via the
authentication server.
Description
level0user
level1user
Level Command
1 configure terminal
0 enable
0 show
Level
0
1
CLI
43