Rate-Limit - SMC Networks 7824M/VSW - annexe 1 Manual

Management Guide
TigerAccess™ EE
7.6.3.4
SMC7824M/VSW
Command
average packet-counter octet
no average packet-counter octet
To display average packet-counter configuration on policy, use the following command.
Command
show policy average-packet
RANGE
show policy average-packet
name NAME
show policy average-packet

Rate-limit

You can configure the rate limit in kbps unit for the classified packets and control the
bandwidth. To set the bandwidth of classified packets in specified policer, use the follow-
ing command.
Command
rate-limit BANDWIDTH
Rate limiting is able to use a token-bucket algorithm of metering. If some traffic exceeds
the rate limit because of its burst size, you can control burst capability of incoming or out-
going traffic by the token bucket size. The largest burst source can send into the network
is roughly proportional to the size of the bucket. Thus, you can reduce the token bucket
size manually to decrease the burst size of traffic. To configure the size of a token bucket
per port or queue of port, use the following command.
Command
qos max-bucketSize
{ egress | ingress } PORTS <12-
16380>
qos max-bucketSize port-queue
PORTS queue <0-7> <12-16380>
Mode
Enables the system to display the statistics of packets
measured in bps.
Policer
Disables the system to display the statistics of packets
measured in bps.
Mode
Shows the name of policies that are enabled average
packet-counter function
RANGE: index of average packet counter (1-50)
Enable
Shows specified policy that is enabled average packet-
Global
counter function
NAME: policy name
Shows the names of all policies that are enabled aver-
age packet-counter function
Mode
Sets the bandwidth for classified packets belonging to
Policer
specified policer (unit: kbps)
Mode
Sets the size of a token bucket to specified port by its
port
direction (unit: kbps).
12-16380: the range of token bucket size in steps of 4
(default: 16 kbps)
Global
Sets the size of a token bucket to a queue of specified
port. (unit: kbps)
0-7: queue number
12-16380: the range of token bucket size in steps of 4
(default: 16 kbps)
Description
Description
Description
Description
CLI
177