Port Priority; Displaying Lacp Configuration - SMC Networks 7824M/VSW - annexe 1 Manual

CLI
8.2.2.7
8.2.2.8
256

Port Priority

To configure priority of an LACP member port, use the following command.
Command
lacp port priority PORTS <1-
65535>
To delete the configured port priority of the member port, use the following command.
Command
no lacp port priority PORTS

Displaying LACP Configuration

To display a configured LACP, use the following command.
Command
show lacp aggregator
show lacp aggregator AGGRE-
GATIONS
show lacp port
show lacp port PORTS
show lacp statistics
To reset LACP statistics information, use the following command.
Command
clear lacp statistic
Mode
Sets the LACP priority of a member port, select the
Bridge
port number. (default: 32768)
Mode
Deletes the configured port priority of a selected mem-
Bridge
ber port, select the member port number.
Mode
Shows the information of aggregated port.
Shows the information of selected aggregated port.
Enable
Global
Shows the information of member port.
Bridge
Shows the information of appropriated member port.
Shows aggregator statistics.
Mode
Enable
Global Resets the information of statistics.
Bridge
Management Guide
TigerAccess™ EE
Description
Description
Description
Description
SMC7824M/VSW