Changing The Pty Display Language; Emergency Announcement - VDO MR6000 Owner's Manual And Mounting Instructions

RDS operation
Programme type selection mode
for extended unit
1. Recall programme type selection menu
(PTY SELECT) by pressing the PTY button 8.
2. The programme type can be selected and
stored via the programme type selection
menu.
Press the JOYSTICK k to the right or left to
switch between "PTY ITEM" (programme
type) and "PRESET" (preset memory) (by
pressing the button).
3. The programme type can be selected if "PTY
ITEM" (programme type) is marked. Press the
JOYSTICK upwards or downwards to select
the programme type. Subsequently, press the
enter button in the centre of the JOYSTICK
to switch to AUDIO operating mode.
(The selected programme type is shown at
the lower right of the display.)
4. A preset memory can be allocated by mark-
ing "PRESET".
5. Press the JOYSTICK upwards or downwards
to select between the preset memories 1 to
6.
6. Subsequently, press the enter button in the
centre of the JOYSTICK to enter the pro-
gramme type.
Press the enter button in the centre of the
JOYSTICK to allocate the programme type
marked under "PTY ITEM" to the selected
preset memory (shown at the lower right of
the display).
7. After setting, press the JOYSTICK to the right
or left to switch to "MENU". Then press the
enter button in the centre of the JOYSTICK
to return to the normal display.

Emergency announcement

All operating mode functions are terminated
if an emergency announcement is received.
"ALARM" appears on the display and emer-
gency announcement is made.
* RDS interruption is not possible during AM radio reception
or television operation.
26
Cancelling the emergency announcement
The reception function for emergency an-
nouncements is deactivated if the AF but-
ton 7 is pressed.
Changing the PTY display
language
Note:
• This function is only available with the unit ex-
tended.
One of 4 languages (English, German, Swedish
and French) can be selected for the PTY display.
* The initial factory setting is "GB" (English).
1. Actuate the ADJ button h to set setting se-
lection display.
2. Press the JOYSTICK k upwards or down-
wards to select "PTY LANG". Then press the
JOYSTICK to the right or left to select the
language. Subsequently, press the enter but-
ton in the centre of the JOYSTICK to store
the language setting.
"GB": English
"F" : French
"D" : German
"S" : Swedish
3. Actuate the ADJ button. The unit then re-
turns to the previous operating mode.
Volume adjusting for TA, emergency
announcement (ALARM) and PTY
The volume for TA, ALARM and PTY interrup-
tions can be set during TA, ALARM or PTY in-
terruptions.
* The initial factory setting is "15".
The volume (00 to 33) can be set during a programme inter-
ruption due to a traffic announcement, emergency an-
nouncement or a PTY signal. For this purpose, press the
VOLUME button 2 upwards or downwards.
* When the TA, ALARM or PTY interruption is terminated, the
volume returns to the level which was set before the inter-
ruption.