Cd Changer Operation; Selecting A Cd; Cd Changer Functions; Play Pause - VDO MR6000 Owner's Manual And Mounting Instructions

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

CD changer functions

If a CD changer (accessory) has been con-
nected, all CD changer functions can be con-
trolled via this unit.
To start play, actuate the FUNC button 1 for
setting CD changer operation.
* If "NO MAG" appears on the display, insert the maga-
zine in the CD changer. While the player is loading (check-
ing) the magazine, "LOADING" is shown on the display.
* If "NO DISC" appears on the display, remove the maga-
zine and place the CDs in the CD holder. Re-insert the
magazine in the CD changer.
CAUTION
It is not possible to play CD ROMs in the
CD changer.

Play pause

1. Actuate the 6II button 3 to interrupt play.
"PAUSE" appears on the display.
2. Press the 6II button again to resume play.

Display of CD titles

With this unit, CD title data can be displayed
with CD text and with titles entered by the user.
Each time the DISP button b is actuated and
held for at least 1 second, the title display
changes in the following sequence:
Retracted unit:
User name (CD) –> CD text (CD name) –>
CD text (title) –> User name (CD) ...
Extended unit:
User name (CD) –> CD text (CD name & title)
–> User name (CD) ...
Note:
• If the CD being played contains no text data and
no user title was entered, "---------" appears on
the display.

CD changer operation

Display of CD names
If the title of a CD is longer than 16 letters
(8 characters for a retracted unit), the title dis-
play can be leafed through as follows:
Retracted unit:
1. Call up the CD text (CD name or title name)
on the display.
2. Press the BAND button e for at least
1 second. The titles are listed in sequence.
Extended unit:
1. Call up the CD text (CD name and title name)
on the display.
2. Press the TITLE button i for at least
1 second to leaf through the CD names.
3. In order to leaf through the titles of a CD,
press the TITLE button for at least one sec-
ond within 30 seconds of recalling the corre-
sponding CD name.
Note:
• Listing of the CD titles begins immediately if the
CD name comprises less than 16 characters.
• The title name is displayed statically if it com-
prises less than 16 characters.

Selecting a CD

Each of the preset buttons c corresponds to a
CD loaded in the magazine.
Selecting a CD (1 to 6)
In order to select a CD, press the correspond-
ing preset button (1 to 6) c.

Title selection

Upward title selection
1. Actuate the SEARCH button 2 on the right
side to jump to the beginning of the next
title.
2. Each time the SEARCH button is actuated on
the right side, the unit jumps to the begin-
ning of the next title.
Downward title selection
1. Actuate the SEARCH button on the left side
to jump back to the beginning of the cur-
rent title.
2. Actuate the SEARCH button twice on the left
side to jump back to the beginning of the
previous title.
27

Advertisement

Table of Contents
loading

Table of Contents