Using The Navigation System; Navigation System & Reversing Camera - VDO MR6000 Owner's Manual And Mounting Instructions

Navigation system & reversing camera
Setting the unit to navigation
system
It is essential that the following settings are
performed after connecting the navigation
system.
1. With the unit extended, press the ADJ but-
ton h to recall the setting menu.
2. Press the JOYSTICK k upwards or down-
wards to select "INPUT". A toolbar appears
on the right which contains the following
items:
"NAVI": Select if VDO Dayton PC 5000
navigation computer is connected.
"CCD": Select if a reversing camera
(accessory) is connected.
"RGB": Select if RGB pictures are fed in
from other manufacturers' components.
"COM": Select if composite pictures are
fed in from other manufacturers' compo-
nents.
3. Press the JOYSTICK to the right or left to se-
lect "NAVI". Subsequently, press the enter
button in the centre of the JOYSTICK to set
the system for connection of the VDO Dayton
navigation system.
Switching between navigation
and audio / video display
• Switching between audio / video and navigation
display is only possible with the unit extended.
Switching between navigation system and au-
dio / video is performed via the "stand-by" func-
tion of the navigation system.

Using the navigation system

Operation of the navigation system is described
in the operating instructions supplied with the
unit.
32
Reverse monitoring via
reversing camera
Connection of a reversing camera is possible
with the MR 6000.
Note:
• This function is only available with the unit
extended.
• If a reversing camera and a TV tuner are to be
connected to the unit simultaneously, connect
the camera to the CCD input of the MR 6000.
Setting the unit to reversing
camera
It is essential that the following settings are
performed after connecting a camera.
1. With the unit extended, press the ADJ but-
ton h to recall the setting menu.
2. Press the JOYSTICK k upwards or down-
wards to select "INPUT".
3. Press the JOYSTICK to the right or left to
select "CCD". Subsequently, press the en-
ter button in the centre of the JOYSTICK to
set the system for connection of the cam-
era.