Removable Operating Panel; Removing The Operating Panel; Installing The Operating Panel - VDO MR6000 Owner's Manual And Mounting Instructions

4. REMOVABLE OPERATING PANEL

The operating panel can be removed as pro-
tection against theft. The operating panel
should be kept in the protective case after
removal to prevent damage. We recommend
that you take the operating panel with you
when leaving your vehicle.

Removing the operating panel

1. Switch off the unit.
2. Press the release button 6 to the right to
release the operating panel.
3. Pull the operating panel towards you and
remove.
Operating panel

Installing the operating panel

1. Hold the operating panel so that the back is
facing towards the main unit and then posi-
tion the bottom edge of the operating pa-
nel against the corresponding edge of the
main unit, as shown in the illustration be-
low.
Release button
2. Engage the operating panel at the top in the
middle until a click is audible.
FUNC button
3. Switch on the unit via FUNC button 1.
CAUTION
• The operating panel can be easily dam-
aged by impacts. Therefore, after re-
moval ensure that it is not dropped or
exposed to heavy impacts.
• When the operating panel is folded
down, it could fall out as a result of
vehicle vibration. This could cause dam-
age to the operating panel. Therefore,
close the operating panel or keep it in
the protective case.
• The connection between main unit and
operating panel is an extremely impor-
tant component. Ensure that it is not
damaged by the pressure effects of fin-
ger nails, screwdrivers, etc.
Note:
• If the operating panel is dirty, it should be wiped
clean using a soft, dry cloth.
15