Television Functions; Video Play - VDO MR6000 Owner's Manual And Mounting Instructions

Television functions

If a TV 6000 TV tuner (accessory) has been
connected, all TV tuner functions can be
controlled via this unit.
WARNING
For safety reasons, the driver should not
watch television or operate the TV tuner
whilst driving. Please note that it is illegal in
certain countries to watch or operate the
television whilst driving.
Television
Note:
• For safety reasons, the MR 6000 is equipped
with an inhibiting device which switches off the
picture when the vehicle is in motion so that
only the tone can be heard. The picture only
appears when the vehicle is stationary and the
parking brake is applied.
• In order to be able to set television stations, it
may first be necessary to set the country of re-
ception. See sub-section "Entering the TV
receiver range" for setting the country.
1. Actuate the FUNC button 1 and set televi-
sion mode.
2. Actuate the BAND button e to set the de-
sired television band (TV1 or TV2). Each time
the button is actuated, the entry selection
between TV1 and TV2 is switched.
3. Actuate the SEARCH button 2
left side to set the desired television station.

Video play

The television tuner is equipped with a video
input to which an external unit can be con-
nected (e.g. 12 V video cassette player, video
recorder, etc.).
1. Press the PTY/RDM button 8 and select VTR
(video recorder).
2. Press the PTY/RDM button again to return
to television reception.
Tuning
There are 3 types of tuning. Automatic search,
manual tuning and preset tuning.
Automatic search
1. Actuate the BAND button e to set the de-
sired television band (TV1 or TV2).
* If "MANU" is illuminated on the screen (or if the unit
is retracted and the display "SRCH" is extinguished),
press the BAND button for at least 1 second. "MANU"
is then extinguished on the display (or the display
"SRCH" illuminates if the unit is extended) and the
search function is then available.
2. Actuate SEARCH button 2 on right or left
side for automatic search. Actuate the
SEARCH button on the right side to automati-
cally set the next receivable television station
in the higher waveband; actuate the SEARCH
button on the left side for automatic setting
in the lower frequency.
Manual tuning
There are 2 types of tuning: Quick tuning and
step-by-step tuning. With step-by-step tuning,
the frequency changes stepwise. With quick
tuning, the desired frequency can be set quickly.
1. Actuate the BAND button e to set the de-
sired television band. (TV1 or TV2)
* If "MANU" is extinguished on the screen (or if the unit
is retracted and the display "SRCH" is illuminated),
press the BAND button for at least 1 second. "MANU"
then appears on the display (or the display "SRCH" is
on right or
extinguished if the unit is retracted) and manual tuning
is then possible.
2. Tuning to a station.
Quick tuning:
Actuate the SEARCH button 2 on the right or
left side and hold for at least 1 second to set a
station.
Step-by-step tuning:
Actuate the SEARCH button on the right or left
side to set a station manually.
Note:
• Manual tuning is terminated if the unit is not
operated for at least 7 seconds.
Television operation
29