Special Functions - VDO CD 3300 User Instructions

SPECIAL FUNCTIONS

SDVC (SPEED DEPENDENT VOLUME CONTROL) and SPEED WARNING
• See INSTALLATION for connection instructions.
SDVC
To compensate for surrounding noise this function automatically increases the volume of the
set as a result of the car's speed. Four compensation levels can be selected. Level 1 gives a
small increase up to level 4 which gives a greater increase. See INITIAL SEETINGS option SDVC
to alter the level until you find one which suits your car.
SPEED WARNING
You can use this function to inform you that you are exceeding a certain speed.
Always obey the Highway Code and current traffic restrictions and conditions!
• To calibrate:
To avoid unnecessary distraction we advise that this procedure is carried out with the help of
somebody else.
While stationary, hold down the SPEED key turn on the set.
1
Display shows:
Then
The sound mutes.
Now drive to 50 km/h (30 mph).
Always obey the Highway Code and current
traffic restrictions and conditions!
2 Once 50 km/h (30 mph) is reached briefly press:
You see:
And hear a beep.
3 Now turn the set off and on again to return to normal operation.
Level 3 is chosen for SDVC and SPEED is set to km/h in 'INITIAL SETTINGS'.
STORE A SPEED
Ensure in 'INITIAL SETTINGS' option 'SPEED' is set either to mph or km/h.
Drive at the desired speed.
1
2 Record the speed e.g. 100 km/h.
Now when recorded speed is exceeded you see:
And hear beeps which become quicker the faster
you drive.
3 Warning ends, if the speed is reduced below
the recorded level or you can skip it:
ACTIVATING / DEACTIVATING SPEED WARNING
Once a speed has been recorded it can be activated
and deactivated as often as you wish.
• Activate/Deactivate speed warning eg. to warn
when the car's speed exceeds the registered speed.
To change the recorded speed see 'STORE A SPEED'.
SPEED
SPEED
SPEED
GB
19