Main Functions; Main Menu; Selecting A Source; Switching On/Off - VDO CD 4402 User Manual

MAIN FUNCTIONS

Switching On/Off

Press POWER to switch the set ON or OFF.
Note : If you turn OFF the contact key and you
leave your car without switching OFF your car
radio, this one will switch OFF automatically.

Selecting a source

Your car radio is designed for different types
of sources You can select them by a short
press on the SOURCE key.
Press the SOURCE key to display and select
the source you want to play.
- DAB*: ,
- Tuner (radio):
- CD/Tape:
- CD Changer (CDC):
- Auxiliary:
Note 1 1 : When a source is ON, its correspon-
ding icon is highlighted on the front.
Note 2 2 : The sound options (Volume, Balance,
Fader, Subwoofer and auto-equalization) are
the same for all sources.
Controlling the volume
a-Volume
+/-
Use the keys
volume automatically increases or decreases if
the SDVC connection has been installed and
selected (see Installation).
Note : Make sure that you can always hear the
traffic (horns, sirens, etc.).
b-Mute
1- Press MUTE, to mute the audio system.
2- Press MUTE again if you want to restore
the last audio source heard.
Note 1 1 : In this state, the following audible
events can occur: Announcements (Traffic,
News, Navigation), Telephone calls, Alarms.
* Depending on radio reference: see table at the end
8
,
,
,
.
to adjust the volume: the
Note 2 2 : Some cars, mobile phones or navi-
gation system can automatically interrupt the
audio output if they are linked to the set.
c-Wake up
The car radio can be used as an intermediate
system by other devices (telephone input) to
reproduce audio via the vehicles build-in
speakers. So, the telephone is able to wake
up the radio when a call occurs.
Displaying Source Informations
Short press on the DISPLAY key to display
informations (track, time, info line, etc.) about
the chosen source (Tape, CD, CDC, DAB).

MAIN MENU

The main menu allows you to configure the
main options of your car radio.
1- Long press the MUTE key to get the MAIN
INIT MENU (see options in cover pages).
2- Use the keys to select an option.
3- Use the keys to set the option value.
4- Press ESC to enter the value.
Defining the Scan Time
With this function, you can define the time
before jumping to the next station (Tuner,
DAB) or track (CD, CDC, tape).
1- Long press MUTE.
2- Select SCAN TIME using the
3- Use the keys, to select a number of
seconds (10s by default).
4- Press ESC to enter the value.
Using radio when not running
This function allows the use of the car radio
when the vehicle is not running (only if the A7
wire is connected to a permanent supply).
1- Long press MUTE.
2- Select LOGIC with the
keys.
keys.