Vlan Add/Edit - ZyXEL Communications USG-300 - V2.20 ED 2 Manual

Chapter 13 Interfaces
Table 76 Configuration > Network > Interface > VLAN (continued)
LABEL
Mask
Apply
Reset

13.8.2 VLAN Add/Edit

This screen lets you configure IP address assignment, interface bandwidth
parameters, DHCP settings, and connectivity check for each VLAN interface. To
access this screen, click the Add icon at the top of the Add column or click an
Edit icon next to a VLAN interface in the VLAN Summary screen. The following
screen appears.
344
DESCRIPTION
This field displays the interface's subnet mask in dot decimal notation.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
ZyWALL USG 300 User's Guide