Configuring Active-Passive Mode Device Ha - ZyXEL Communications USG-300 - V2.20 ED 2 Manual

Chapter 39 Device HA
192.168.1.5 and ZyWALL B has its own LAN management IP address of
192.168.1.6. These do not change when ZyWALL B becomes the master.
Figure 479 Management IP Addresses

39.3.1 Configuring Active-Passive Mode Device HA

The Device HA Active-Passive Mode screen lets you configure general active-
passive mode device HA settings, view and manage the list of monitored
interfaces, and synchronize backup ZyWALLs. To access this screen, click
Configuration > Device HA > Active-Passive Mode.
Figure 480 Configuration > Device HA > Active-Passive Mode
714
A
192.168.1.1
192.168.1.5
B
192.168.1.1
192.168.1.6
ZyWALL USG 300 User's Guide