Authentication Method Objects - ZyXEL Communications USG-300 - V2.20 ED 2 Manual

Chapter 45 Authentication Method
Click Show Advance Setting and select Enable Extended Authentication.
2
Select Server Mode and select an authentication method object from the drop-
3
down list box.
Click OK to save the settings.
4
Figure 513 Example: Using Authentication Method in VPN

45.2 Authentication Method Objects

Click Configuration > Object > Auth. Method to display the screen as shown.
Note: You can create up to 16 authentication method objects.
Figure 514 Configuration > Object > Auth. Method
The following table describes the labels in this screen.
Table 217 Configuration > Object > Auth. Method
LABEL
Add
Edit
Remove
Object
References
776
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
Select an entry and click Object References to open a screen that shows
which settings use the entry. See
example.
Section 13.3.2 on page 309
ZyWALL USG 300 User's Guide
for an