Application Patrol Statistics; Application Patrol Statistics: General Setup - ZyXEL Communications USG-300 - V2.20 ED 2 Manual

Table 40 Monitor > System Status > USB Storage (continued)
LABEL
Status
Detail

10.12 Application Patrol Statistics

This screen displays a bandwidth usage graph and statistics for selected protocols.
Click Monitor > AppPatrol Statistics to open the following screen.

10.12.1 Application Patrol Statistics: General Setup

Use the top of the Monitor > AppPatrol Statistics screen to configure what to
display.
Figure 243 Monitor > AppPatrol Statistics: General Setup
ZyWALL USG 300 User's Guide
DESCRIPTION
Ready - you can have the ZyWALL use the USB storage device.
Click Remove Now to stop the ZyWALL from using the USB storage
device so you can remove it.
Unused - the connected USB storage device was manually unmounted
by using the Remove Now button or for some reason the ZyWALL
cannot mount it.
Click Use It to have the ZyWALL mount a connected USB storage
device.
none - no USB storage device is connected.
This field displays any other information the ZyWALL retrieves from the
USB storage device.
Deactivated - the use of a USB storage device is disabled (turned off)
on the ZyWALL.
OutofSpace - the available disk space is less than the disk space full
threshold (see Section 50.3 on page 827
threshold).
Mounting - the ZyWALL is mounting the USB storage device.
Removing - the ZyWALL is unmounting the USB storage device.
none - the USB device is operating normally or not connected.
Chapter 10 Monitor
for how to configure this
259