Procedure To Configure Dynamic Dns; Figure 141 Menu 1.1 Configure Dynamic Dns; Table 97 Menu 1.1 Configure Dynamic Dns - ZyXEL Communications P-335WT User Manual

23.2.1 Procedure to Configure Dynamic DNS

To configure Dynamic DNS, go to Menu 1 — General Setup and select Yes in the Edit
Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as
shown next.

Figure 141 Menu 1.1 Configure Dynamic DNS

Follow the instructions in the next table to configure Dynamic DNS parameters.

Table 97 Menu 1.1 Configure Dynamic DNS

FIELD
Service Provider
Active
DDNS Type
Host 1- 3
User
Password
Enable
Wildcards
Chapter 23 Menu 1 General Setup
Note: If you have a private WAN IP address, then you cannot
use Dynamic DNS
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= Yes
DDNSType= DynamicDNS
Host1=
Host2=
Host3=
USER=
Password= ********
Enable Wildcard= No
Offline= N/A
Edit Update IP Address:
Use Server Detected IP= No
User Specified IP Address= No
IP Address= N/A
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
This is the name of your Dynamic DNS service provider.
Press [SPACE BAR] to select Yes and then press [ENTER] to make dynamic DNS
active.
Press [SPACE BAR] and then [ENTER] to select DynamicDNS if you have a
dynamic IP address(es). Select StaticDNS if you have a static IP address(s).
Select CustomDNS to have dyns.org provide DNS service for a domain name that
you already have from a source other than dyndns.org.
Enter your host name(s) in the fields provided. You can specify up to two host
names separated by a comma in each field.
Enter your user name.
Enter the password assigned to you.
Your Prestige supports DYNDNS Wildcard. Press [SPACE BAR] and then [ENTER]
to select Yes or No This field is N/A when you choose DDNS client as your service
provider.
P-335 Series User's Guide
287