Figure 8-16 Example 3 - Menu; Figure 8-17 Example 3 Final Menu - ZyXEL Communications PRESTIGE 1400 User Manual

You need to configure Address Mapping Set 1 from Menu 15.1 - Address Mapping Sets. Therefore you
Step 1.
must choose the Full Feature option from the Network Address Translation field (in Menu 4 or Menu
11.3).
Enter 15 from the main menu.
Step 2.
Enter 1 to configure the Address Mapping Sets.
Step 3.
Choose 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and then select 1
Step 4.
from Select Rule field. Press [ENTER] to confirm.
Select Type= as One-to-One and enter the Local IP: Start as 192.168.1.10 (the IP address of FTP
Step 5.
Server 1), the Global IP: Start as 10.132.50.1 (the first IGA). (See Figure 8-16)
Repeat the previous step for rules 2 to 4 as outlined above.
Step 6.
When finished, Menu 15.1.1 should look like as shown in Figure 8-17.
Step 7.
The following figure shows how to configure the first rule.
Type= One-to-One
Local IP:
Global IP:
When you have configured all four rules, Menu 15.1.1 should look as follows.
Set Name= Example3
Idx Local Start IP
--- ---------------
1. 192.168.1.10
2 192.168.1.11
3. 0.0.0.0
4.
5.
6.
7.
8.
9.
10.
Action= Edit
Press ENTER to Confirm or ESC to Cancel:
Now you configure IGA3 to map to the web and mail server on the LAN.
Step 8. Enter 15 from the main menu.
NAT
Menu 15.1.1.1 Address Mapping Rule
Start= 192.168.1.10
End = N/A
Start= 10.132.50.1
End = N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 8-16 Example 3 - Menu 15.1.1.1

Menu 15.1.1 - Address Mapping Rules
Local End IP Global Start IP
--------------- ---------------
10.132.50.1
10.132.50.2
255.255.255.255 10.132.50.3
10.132.50.3
Select Rule=

Figure 8-17 Example 3 Final Menu 15.1.1

Prestige 1400 WAN Router with Integrated Ethernet Switch
Global End IP
---------------
Type
------
1-1
1-1
M-1
Server
8-13