Table of Contents
Advertisement
5.3
TCP/IP Ethernet Setup
To edit Menu 3.2, select Menu 3 - Ethernet Setup in the main menu and then the appropriate LAN. Then select
the submenu option 2, and press [ENTER] to display Menu 3.2 - TCP/IP Ethernet Setup as shown next.
DHCP Setup:
DHCP= Server
Client IP Pool Starting Address= 192.168.1.1
Size of Client IP Pool= 220
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
TCP/IP Setup:
IP Address= 192.68.1.254
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Multicast= N/A
IP Policies=
Press Space Bar to Toggle.
Follow the instructions in the following table on how to configure the DHCP fields.
FIELD
DHCP
Client IP Pool
Starting Address
Size of Client IP
Pool
Primary DNS Server
Secondary DNS
Server
Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.
FIELD
TCP/IP Setup
IP Address
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based
Internet Access
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Version= RIP-1
Press ENTER to Confirm or ESC to Cancel:
Figure 5-1 Menu 3.2 - TCP/IP Ethernet Setup
Table 5-2 LAN DHCP Setup Menu Fields
This field enables/disables the DHCP server. If it is set to
Server, your Prestige will act as a DHCP server. If set to
None, DHCP service will be disabled and you must have
another DHCP sever on your LAN, or else the workstation
must be manually configured. When DHCP is set to Server,
the following four items need to be set.
This field specifies the first of the contiguous addresses in
the IP address pool.
This field specifies the size, or count, of the IP address
pool.
Enter the IP addresses of the DNS servers. The DNS
servers are passed to the DHCP clients along with the IP
address and the subnet mask. Leave these entries at
0.0.0.0 if a WAN DHCP server provides them.
Table 5-3 LAN TCP/IP Setup Menu Fields
Enter the IP address of your Prestige in dotted decimal notation.
on the IP address that you assign. Unless you are implementing
Prestige 1400 WAN Router with Integrated Ethernet Switch
DESCRIPTION
DESCRIPTION
EXAMPLE
None
Server
(default)
192.168.1.1
220
EXAMPLE
192.168.1.254
(default)
255.255.255.0
5-3
Advertisement
Table of Contents
Troubleshooting
