Table of Contents
Advertisement
13.4
Diagnostic
The diagnostic facility allows you to test the different aspects of your Prestige to determine if it is working
properly. Menu 24.4 allows you to choose among various types of diagnostic tests to evaluate your system, as
shown next. "xDSL" refers to the network module type, i.e., ADSL, IDSL or SDSL.
TCP/IP
12. Ping Host
Enter Menu Selection Number:
Follow this procedure to get to the Diagnostic screen.
Step 1
From the main menu, select option 24 to open Menu 24 - System Maintenance.
From this menu, select option 4. This will open Menu 24.4 - System Maintenance - Diagnostic.
Step 2
The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and the connections.
FIELD
Reboot System
Command Mode
Ping Host
Host IP Address
13.5
Boot Module Commands
System Information and Maintenance
Menu 24.4 - System Maintenance – Diagnostic
Host IP Address= N/A
Figure 13-10 Menu 24.4 - System Maintenance - Diagnostic
Table 13-5 System Maintenance Menu Diagnostic
This option reboots the Prestige.
This option allows you to diagnose and test your Prestige
using a specified set of commands.
This diagnostic test pings the host, which determines the
functionality of the TCP/IP protocol on both systems and the
links in between.
Enter the host IP address.
Prestige 1400 WAN Router with Integrated Ethernet Switch
System
21. Reboot System
22. Command Mode
DESCRIPTION
13-7
Advertisement
Table of Contents
Troubleshooting
