Security: 802.1X Only; Access Point - ZyXEL Communications NWA-1100 Manual

Chapter 8 Wireless Security Screen
Table 22 Security: WEP (continued)
LABEL
Reset
Back

8.4.2 Security: 802.1x Only

This screen varies depending on whether you select Access Point or Wireless Client in the
Wireless > Wireless Settings screen.

8.4.2.1 Access Point

Use this screen to use 802.1x-Only security mode for your NWA that is in Access Point operating
mode. Select 802.1x-Only in the Security Mode field to display the following screen.
Figure 37 Security: 802.1x Only for Access Point
The following table describes the labels in this screen.
Table 23 Security: 802.1x Only for Access Point
LABEL
Security Settings
Profile Name
Security Mode
Rekey Options
ReAuthentication
Time
Group-Key
Update
Apply
90
DESCRIPTION
Click Reset to begin configuring this screen afresh.
Click Back to return to the previous screen.
DESCRIPTION
This is the name that identifying this profile.
Choose 802.1x Only in this field.
Specify how often wireless stations have to resend user names and passwords in
order to stay connected.
Enter a time interval between 10 and 9999 seconds. Alternatively, enter "0" to
turn reauthentication off.
Note: If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
The NWA automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the user name and
password again before access to the wired network is allowed.
Click Apply to save your changes.
NWA1100-N User's Guide