Configure The Ssid Profiles - ZyXEL Communications NWA-1100 Manual

Chapter 4 Tutorial
The standard network (SSID01) has access to all resources. The VoIP network (VoIP_SSID) has
access to all resources and a high QoS priority. The guest network (Guest_SSID) has access to the
Internet and the network printer only, and a low QoS priority.
To configure these settings, you need to know the Media Access Control (MAC) addresses of the
devices you want to allow users of the guest network to access. The following table shows the
addresses used in this example.
Table 5 Tutorial: Example Information
Network router (A) MAC address
Network printer (B) MAC address

4.2.1 Configure the SSID Profiles

Log in to the NWA (see
1
appears.
Select the Profile1 check-box and click Edit.
2
Rename the Profile Name as SSID01. Click Save.
3
Repeat Step 2 and 3 to change Profile2 and Profile3 to VoIP_SSID and Guest_SSID.
4
40
00:AA:00:AA:00:AA
AA:00:AA:00:AA:00
Section 2.2 on page 35). Click Wireless > SSID. The SSID screen
NWA1100-N User's Guide