Wireless Client Mode - ZyXEL Communications NWA-1100 Manual

Chapter 6 Wireless Settings Screen

6.4.4 Wireless Client Mode

Use this screen to turn your NWA into a wireless client. Select Wireless Client as the Operation
Mode. The following screen displays.
Figure 27 Wireless > Wireless Settings: Wireless Client
The following table describes the general wireless LAN labels in this screen.
Table 13 Wireless > Wireless Settings: Wireless Client
LABEL
Basic Settings
Operation Mode
Site Survey
Wireless Mode
70
DESCRIPTION
Select Wireless Client in this field.
Click this to view a list of available wireless access points within the range. Select
the AP you want to use and click Selected.
Note: After selecting Wireless Client as the Operation Mode in the Basic
Settings section, you must click Apply to be able to select from the AP list.
Select 802.11b/g to allow both IEEE802.11b and IEEE802.11g compliant WLAN
devices to associate with the NWA. The transmission rate of your NWA might be
reduced.
Select 802.11b/g/n to allow IEEE802.11b, IEEE802.11g and IEEE802.11n
compliant WLAN devices to associate with the NWA. The transmission rate of the
NWA might be reduced.
NWA1100-N User's Guide