Wireless Client - ZyXEL Communications NWA-1100 Manual

Chapter 8 Wireless Security Screen
The following table describes the labels in this screen.
Table 26 Security: WPA for Access Point
LABEL
Security Settings
Profile Name
Security Mode
Rekey Options
ReAuthentication
Timer
Group Key
Update
Apply
Reset
Back

8.4.4.2 Wireless Client

Use this screen to employ WPA as the security mode for your NWA that is in Wireless Client
operating mode. Select WPA in the Security Mode field to display the following screen.
Figure 41 Security: WPA for Wireless Client
94
DESCRIPTION
This is the name that identifying this profile.
Choose WPA in this field.
Specify how often wireless stations have to resend user names and passwords in
order to stay connected.
Enter a time interval between 10 and 9999 seconds. Alternatively, enter "0" to
turn reauthentication off.
Note: If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
The Group Key Update Timer is the rate at which the AP sends a new group
key out to all clients. The re-keying process is the WPA equivalent of
automatically changing the group key for an AP and all stations in a WLAN on a
periodic basis. Setting of the Group Key Update Timer is also supported in
WPA-PSK mode.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
Click Back to return to the previous screen.
NWA1100-N User's Guide