Wireless Client - ZyXEL Communications NWA-1100 Manual

When the NWA is in AP+Bridge mode, security between APs (the Wireless Distribution System or
WDS) is independent of the security between the wireless stations and the AP. If you do not enable
WDS security, traffic between APs is not encrypted. When WDS security is enabled, both APs must
use the same pre-shared key. See
Unless specified, the term "security settings" refers to the traffic between the wireless stations and
the NWA.
Figure 7 AP + Bridge Application

1.2.4 Wireless Client

The NWA can be used as a wireless client to communicate with an existing network. In the figure
below, the printer can receive requests from the wired computer clients A and B via the NWA in
Wireless Client mode.
Figure 8 Wireless Client Application
NWA1100-N User's Guide
Section 6.4.3 on page 69
Chapter 1 Introducing the NWA
for more details.
23