Ip Screen; Chapter 11 Ip Screen; Overview; What You Can Do In This Chapter - ZyXEL Communications NWA-1100 Manual

802.11b/g/n poe access point
Hide thumbs Also See for NWA-1100:
Table of Contents

Advertisement

11.1 Overview

This chapter describes how you can configure the IP address of your NWA.
The Internet Protocol (IP) address identifies a device on a network. Every networking device
(including computers, servers, routers, printers, etc.) needs an IP address to communicate across
the network. These networking devices are also known as hosts.
Figure 50 IP Setup
The figure above illustrates one possible setup of your NWA. The gateway IP address is 192.168.1.2
and the IP address of the NWA is 192.168.1.2 (default). The gateway and the device must belong in
the same subnet mask to be able to communicate with each other.

11.2 What You Can Do in this Chapter

Use the IP screen to configure the IP address of your NWA (see

11.3 What You Need to Know

The Ethernet parameters of the NWA are preset in the factory with the following values:
IP address of 192.168.1.2
1
Subnet mask of 255.255.255.0 (24 bits)
2
NWA1100-N User's Guide
C
H A P T E R
Section 11.4 on page
11

IP Screen

106).
105

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nwa1100n-ceNwa1100-n

Table of Contents