Activeshot Function; Sub Window Settings - Eizo FLEXSCAN L997 Manual

5. ActiveShot Function

When two PCs are connected to the monitor, ActiveShot (Picture in Picture) function allows you to display
both screen images on the Main window and Sub window at the same time. About connecting two PCs to a
monitor, See Connecting Two PCs to the
[Example]
5-1. Operation
To display/close the Sub window
ON: Press Input Signal Selection Button on the control panel for 2 seconds.
OFF: Press Input Signal Selection Button again for 2 seconds.
Selecting "Off" on the <Picture in Picture> menu will also close the sub window.
To switch the image of main and Sub window
Slightly pressing the Input signal selection button (Signal 1-2) switches the signal of Main window and Sub
window.
The ActiveShot function cannot be used in the following cases.
Using ActiveRotationII function.
Being in "External" mode of FIneContrast mode.
When using the ActiveShot function, some animated images may flicker.

5-2. Sub Window Settings

Display Mode
Monitor.