Connecting Two Pcs To The Monitor - Eizo FLEXSCAN L997 Manual

The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.
5. Turn on the monitor's Power button and then turn on the PC's power.
The monitor's power indicator will light up (blue).
If an image does not appear, refer to the "
Whenever finished, turn off the PC and the monitor.
When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed
for a few seconds on the right top corner of the screen.
Adjust brightness of the screen depending on the brightness of your environment. Too dark or too
bright of a screen can cause eyestrain.
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
6. When using the monitor in portrait style, refer to the
7. When using the software, ScreenManager Pro for LCD (for Windows), connect the
upstream port of the monitor to the downstream port of the USB compliant PC or
another hub with the USB cable.
After connecting the USB cable, the USB function can be set up automatically. For further details about the
"ScreenManager Pro for LCD", refer to the readme.txt in the CD-ROM.

2-3. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the back of the monitor.
Connecting Examples
9. TROUBLESHOOTING" for advice.
"6. ActiveRotationII Function".