5. ActiveShot Function
When two PCs are connected to the monitor, ActiveShot (Picture in Picture) function
allows you to display both screen images on the Main window and Sub window at the
same time. About connecting two PCs to a monitor, see p. 15.
[Example]
Signal1
5-1. Operation
To display/close the Sub window
ON: Press PinP button on the control panel.
OFF: Press the PinP button again.
To switch the image of main and Sub window
Pressing the Input signal selection button (Signal 1-2) switches the signal of Main
window and Sub window.
NOTE
• When using the ActiveRotation function (p. 35), the ActiveShot function cannot be
used.
• When using the ActiveShot function, some animated images may flicker.
Signal 2
Input Signal Selection Button
Main Window
Sub Window
PinP Button
5. ActiveShot Function
English
31