Eizo FLEXSCAN L997 Manual page 43

11. Afterimages appear.
12. The screen has defective pixels (e.g. slightly light
or dark).
13. Fingerprints remain on the screen.
14. The <Smoothing> cannot be selected.
15. The Main menu of ScreenManager does not
operate.
16. The FineContrast mode does not operate.
17. The Auto Adjustment Button does not operate.
18. The ActiveShot function cannot be operated.
19. The ActiveRotationII function cannot be
operated.
20. Frequency does not change after installing
"Monitor information file" in the attached utility
disk on Windows 98/2000/Me/XP.
Do you use the screen saver or timer
when displaying the same image for
extended periods of time?
Afterimages are particular to LCD
monitors. Avoid displaying the same
image for extended periods of time.
This is due to the characteristics of the
panel itself, and not the LCD product.
Leaving the screen white may solve the
problem.
<Smoothing> is disabled when the
screen is displayed in the 1600 x1200.
The image size is doubled both in
horizontally and vertically to (i.e. 1600
x 1200 enlarged from 800 x 600)
provide clear focus which does not
require this function.
"Normal" is selected in <Screen Size>.
The adjustment lock is probably on. To
unlock: turn the LCD monitor off. Then,
while pressing the Auto Adjustment
Button, turn the power on.
Check that the FineContrast mode is not
activated.
Check that the Main menu of
ScreenManager is not activated.
The adjustment lock is probably on. To
unlock: turn the LCD monitor off. Then,
while pressing the Auto Adjustment
Button, turn the power on.
Check that the ActiveRotationII
function is not used.
Check that the FineContrast mode is not
in "External" mode.
Check that the ActiveShot function
not used.
Use the graphics board's utility software
to change the input signal frequency.
is