Table of Contents
Advertisement
3
Set the brightness of the black area surrounding the displayed image.
Set the <Border Intensity>.
In the "Enlarge" mode or "Full Screen" mode, the outer area (border) is usually black. Select
<BorderIntensity> in the <Others> menu and adjust by using
3-10. Setting the orientation of the Adjustment menu
The orientation of the Adjustment menu can be changed.
[Procedure]
1. Select <Menu Settings> in the Adjustment menu <Others> menu.
2. Select <Orientation> in the <Menu Settings> menu.
3. Use
to select between "Portrait" and "Landscape".
4. Turn the monitor screen 90° in clockwise direction.
NOTE
• Be sure that the cables are correctly connected.
Tips
• For using the monitor with "Portrait" position, the graphics board supporting portrait display is
required. When using the monitor with "Portrait" position, the setting needs to be changed depending
on the graphics board used in your PC. Refer to the manual of the graphics board for details.
3-11. EIZO Logo Appearing Function
When switching on the power button on the front control panel, the EIZO logo is displayed for a while.
If you desire to display or undisplay this logo, use this function. (Default is logo appearing.)
[To undisplay]
1. Press
to turn off the unit.
2. Press
again while pressing
The EIZO logo does not appear on the screen.
[To display]
1. Press
to turn off the unit.
2. Press
again while pressing
The EIZO logo appear on the screen.
.
.
3. Screen Adjustment and Settings
.
Border
27
Advertisement
Table of Contents
